Category
Manufacturer
Brands
Thread Insert Tools

9 Results

Sort By
Items Per Page
<ul><li>This highly versatile insert delivers the highest torque-out and high pull-out values in sheet metal, structural foam, fiberglass, and some plastics.</li><li>Install in a wide variety of materials from .020 to .165 inches thick</li><li>Large head allows applications where oversized or irregular holes might be a problem</li><li>High torque-out values resists spinning due to cross-threading or over-tightening</li><li>"Bubble" on backside resists pull-out</li><li>Blind installation - no access to the backside required</li><li>Installs easily with the lever action tool #101770252 (90044) and appropriate conversion kit</li><li>plated to QQ-P-416 TYPE II CLASS 2 Specs for protection 40 times better than zinc</li><li>Exceptional torque strength is achieved as the GRIP-SERT's knurled body expands filling the hole</li><li>Offers highest all around strength characteristics and has been designed to be used with Grade 5 or Metric 8.8/10.9 screws</li></ul>|
Grip-Sert Threaded Inserts

TSN® Insert and Tric-Nut Installation Tools

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>Inserts are 303 stainless steel with 302 stainless keys</li><li>Tolerances: +/- 0.10 inches or +/- .25MM</li><li>Passivated</li></ul>|
Keysert Driver Tool Thickwall

Key-Locking Driver Tool Thickwall - 7/16

Manufacturer: Approved Vendor
Brand: Approved Vendor
T-Handle Tool Conversion Kits
T-Handle Tool Conversion Kits

T-Handle Tool Conversion Kits - 10-24

Manufacturer: Approved Vendor
Brand: Approved Vendor
T-Handle Installation Tool
T-Handle Installation Tool

T-Handle Installation Tool

Manufacturer: Approved Vendor
Brand: Approved Vendor
Part #: 101735787
Legacy #: 90062
Min. Order Qty: 1
Qty. Interval: 1
<ul><li>Inserts are 303 stainless steel with 302 stainless keys</li><li>Tolerances: +/- 0.10 inches or +/- .25MM</li><li>Passivated</li></ul>|
Keysert Driver Tool

Key-Locking Driver Tool - 1/4

Manufacturer: Approved Vendor
Brand: Approved Vendor
TSN Insert and Tric-Nut Lever Hand Tool Kit
TSN Insert and Tric-Nut Lever Hand Tool Kit

TSN Insert and Tric-Nut Lever Hand Tool Kit

Manufacturer: Approved Vendor
Brand: Approved Vendor
Part #: 102721946
Min. Order Qty: 1
Qty. Interval: 1
Woodsert Driver Tool - 3/8
Woodsert Driver Tool - 3/8

Woodsert Driver Tool - 3/8

Manufacturer: Approved Vendor
Brand: Approved Vendor
Part #: 102714379
Legacy #: 10395
Min. Order Qty: 1
Qty. Interval: 1
<ul><li>This tool is designed for the manual installation of Grip#2;Serts, Tric-Nuts and TSN Inserts. It functions in a similar manner to that of a breakstem rivet hand tool. With simple set-up and in a single, uniform stroke, this tool consistently sets inserts. Extra long handles for added leverage allow the inserts to be placed with minimal effort. High strength formed steel construction eliminates the inherent weakness of cast parts.</li></ul>|
Lever Hand Tool Conversion Kits

Lever Hand Tool Conversion Kits - M6 x 1.0

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>When threads become stripped, worn or damaged for any reason, their strength and reliability are greatly reduced. When this happens on critical threaded assemblies, cars, and other types of equip#2;ment, it may become unsafe to operate. These potentially dangerous situations are eliminated when the damaged thread is repaired with a coil screw insert. The coil threaded insert provides stronger, more reliable threads than the original tapped hole and at the same time eliminates the possibility of thread wear, seizing and corrosion.</li><li>Applied MSS Coil offers the most effective and universally accepted method of thread repair.</li><li>Applied MSS Coil inserts quickly and permanently restore stripped, worn or damaged threads to their original size and condition.</li></ul>|
Thread Repair Install Tool

Thread Repair - UNC Coarse Thread - Install Tool - 5/16-18

Manufacturer: Approved Vendor
Brand: Approved Vendor
Showing 1 - 9 of 9 Products