Category
Manufacturer
Brands
Thread Repair

17 Results

Sort By
Items Per Page
<ul><li>3 sizes for diameters from 1/4 in to 6 in</li><li>Repair damaged threads quickly</li><li>Rockwell hardness of 58 RC</li><li>Blades easily adapt to any thread pitch</li><li>Blades automatically fit into the thread grooves eliminating guesswork</li><li>Works on all UNC, UNF, NPT, metric threads</li><li>Replacement blades available</li></ul>|
Thread Repair (External)

Thread Repair (External) Replacement Blades for #101448551

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>This highly versatile insert delivers the highest torque-out and high pull-out values in sheet metal, structural foam, fiberglass, and some plastics.</li><li>Install in a wide variety of materials from .020 to .165 inches thick</li><li>Large head allows applications where oversized or irregular holes might be a problem</li><li>High torque-out values resists spinning due to cross-threading or over-tightening</li><li>"Bubble" on backside resists pull-out</li><li>Blind installation - no access to the backside required</li><li>Installs easily with the lever action tool #101770252 (90044) and appropriate conversion kit</li><li>plated to QQ-P-416 TYPE II CLASS 2 Specs for protection 40 times better than zinc</li><li>Exceptional torque strength is achieved as the GRIP-SERT's knurled body expands filling the hole</li><li>Offers highest all around strength characteristics and has been designed to be used with Grade 5 or Metric 8.8/10.9 screws</li></ul>|
Grip-Sert Threaded Inserts

TSN® Insert and Tric-Nut Installation Tools

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>Inserts are 303 stainless steel with 302 stainless keys</li><li>Tolerances: +/- 0.10 inches or +/- .25MM</li><li>Passivated</li></ul>|
Keysert Driver Tool Thickwall

Key-Locking Driver Tool Thickwall - 7/16

Manufacturer: Approved Vendor
Brand: Approved Vendor
Thread Repair (Internal)
Thread Repair (Internal)

Thread Repair Tool (Internal) - 11/16 to 13/16 in

Manufacturer: Approved Vendor
Brand: Approved Vendor
T-Handle Tool Conversion Kits
T-Handle Tool Conversion Kits

T-Handle Tool Conversion Kits - 10-24

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>When threads become stripped, worn or damaged for any reason, their strength and reliability are greatly reduced. When this happens on critical threaded assemblies, cars, and other types of equipment, it may become unsafe to operate. These potentially dangerous situations are eliminated when the damaged thread is repaired with a coil screw insert. The coil threaded insert provides stronger, more reliable threads than the original tapped hole and at the same time eliminates the possibility of thread wear, seizing and corrosion.</li><li>Applied MSS Coil offers the most effective and universally accepted method of thread repair.</li><li>Applied MSS Coil inserts quickly and permanently restore stripped, worn or damaged threads to their original size and condition.</li></ul>|
Thread Repair - UNC Coarse Thread - Tap

Thread Repair - UNC Coarse Thread - STI Tap - 25/32

Manufacturer: Approved Vendor
Brand: Approved Vendor
Thread Restorers
Thread Restorers

Thread Restorers: 9, 10, 12, 16, 20, 27, 28, 32

Manufacturer: Approved Vendor
Brand: Approved Vendor
T-Handle Installation Tool
T-Handle Installation Tool

T-Handle Installation Tool

Manufacturer: Approved Vendor
Brand: Approved Vendor
Part #: 101735787
Legacy #: 90062
Min. Order Qty: 1
Qty. Interval: 1
Package QTY: 1
<ul><li>Inserts are 303 stainless steel with 302 stainless keys</li><li>Tolerances: +/- 0.10 inches or +/- .25MM</li><li>Passivated</li></ul>|
Keysert Driver Tool

Key-Locking Driver Tool - 1/4

Manufacturer: Approved Vendor
Brand: Approved Vendor
TSN Insert and Tric-Nut Lever Hand Tool Kit
TSN Insert and Tric-Nut Lever Hand Tool Kit

TSN Insert and Tric-Nut Lever Hand Tool Kit

Manufacturer: Approved Vendor
Brand: Approved Vendor
Part #: 102721946
Min. Order Qty: 1
Qty. Interval: 1
Package QTY: 1
<ul><li>Applied MSS Coil offers the most effective and universally accepted method of thread repair.</li><li>Applied MSS Coil inserts quickly and permanently restore stripped, worn or damaged threads to their original size and condition.</li></ul>|
Applied MSS℠ Coil Thread Repair Inserts & Kits

Applied MSS℠ Coil Thread Repair Inserts & Kits - Install Tool 5/16-24 & M8-1.5 Inserts

Manufacturer: Approved Vendor
Brand: Approved Vendor
Woodsert Driver Tool - 3/8
Woodsert Driver Tool - 3/8

Woodsert Driver Tool - 3/8

Manufacturer: Approved Vendor
Brand: Approved Vendor
Part #: 102714379
Legacy #: 10395
Min. Order Qty: 1
Qty. Interval: 1
Package QTY: 1
Showing 1 - 12 of 17 Products