Category
Manufacturer
Brands
Thread Inserts

14 Results

Sort By
Items Per Page
<ul><li>Manufactured of 18/8 stainless steel diamond shaped wire</li><li>Driving tang allows for easy installation and is notched for easy removal</li><li>All kits include: Heli-Coil tap, installation tool, a quantity of inserts and detailed instructions packaged in a durable pouch. *Kits for 7/8 and 1 in inserts include a 1/2 in shank HSS drill bit and are packaged in a sturdy metal case.</li></ul>|
Heli-Coil Thread Repair Kit

Heli-Coil Thread Repair Kit - 1/4-20

Manufacturer: Approved Vendor
Brand: Heli-Coil®
<ul><li>Inserts are 303 stainless steel with 302 stainless keys</li><li>Tolerances: +/- 0.10 inches or +/- .25MM</li><li>Passivated</li></ul>|
Keysert Driver Tool

Key-Locking Driver Tool - #10 - Thickwall

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>Manufactured of 18/8 stainless steel diamond shaped wire</li><li>Driving tang allows for easy installation and is notched for easy removal</li><li>All kits include: Heli-Coil tap, installation tool, a quantity of inserts and detailed instructions packaged in a durable pouch. *Kits for 7/8 and 1 in inserts include a 1/2 in shank HSS drill bit and are packaged in a sturdy metal case.</li></ul>|
Heli-Coil Thread Repair Inserts

Heli-Coil Thread Repair Inserts - 5/8-11

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>For applications requiring higher pullout strengths or thread sizes exceeding 1/2 in</li><li>Key-Locking Material: C1215 Steel or Equivalent </li></ul>|
Key-Locking Thread Repair Thickwall Inserts

Key-Locking Inserts (Heavy Duty) - 7/8-9

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>For applications requiring higher pullout strengths or thread sizes exceeding 1/2 in</li><li>Key-Locking Material: C1215 Steel or Equivalent</li></ul>|
Key-Locking Inserts (Heavy Duty - Inch Series)

Key-Locking Inserts (Heavy Duty) - 7/16-14

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>Install with standard drills and taps</li><li>No pre-winder tool required</li><li>Impossible to cross thread while installing</li><li>Solid bushing with locking pins</li><li>No tang break-off</li><li>Positive mechanical lock against rotation</li><li>May be used in virtually any material - aluminum, magnesium, cold rolled steel</li><li>Provides high strength and reliability. One length per size provides maximum pullout strength. Breaks Grade 8 bolts in test after test.</li><li>Easy to remove</li><li>No special skills required. Installation procedures can be learned in minutes.</li><li>Many sizes available in Thinwall and Heavy Duty Thickwall. Metric sizes also available.</li></ul>|
Key-Locking Inserts (Thinwall - Inch Series)

Key-Locking Inserts (Thinwall) - 1/2-20

Manufacturer: Approved Vendor
Brand: Approved Vendor
TSN Insert and Tric-Nut Lever Hand Tool Conversion Kits
TSN Insert and Tric-Nut Lever Hand Tool Conversion Kits

TSN Insert and Tric-Nut Lever Hand Tool Conversion Kits - 6-32

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>An insert with strong, permanent steel threads for use in blind, buried, and through holes in most any material</li><li>Reduced overall length of the installed TRIC-NUT allows it to be used in limited clearance applications</li><li>Works in any thickness over .030" (equivalent to 22ga. sheet metal)</li><li>Can be used with Grade 8/Metric 10.9 screws due to TRIC-NUTS high shear load capacity</li><li>Nearly flush installation resists vibration and self-tightens with repeated use</li></ul>|
Tric-Nut Threaded Steel Inserts

Tric-Nut Threaded Steel Inserts - 1/4-20

Manufacturer: Approved Vendor
Brand: Approved Vendor
TSN Insert and Tric-Nut Lever Hand Tool
TSN Insert and Tric-Nut Lever Hand Tool

TSN Insert and Tric-Nut Lever Hand Tool

Manufacturer: Approved Vendor
Brand: Approved Vendor
Part #: 101770252
Legacy #: 90044
Min. Order Qty: 1
Qty. Interval: 1
Package QTY: 1
<ul><li>This highly versatile insert delivers the highest torque-out and high pull-out values in sheet metal, structural foam, fiberglass, and some plastics.</li><li>Install in a wide variety of materials from .020 to .165 inches thick</li><li>Large head allows applications where oversized or irregular holes might be a problem</li><li>High torque-out values resists spinning due to cross-threading or over-tightening</li><li>"Bubble" on backside resists pull-out</li><li>Blind installation - no access to the backside required</li><li>Installs easily with the lever action tool #101770252 (90044) and appropriate conversion kit</li><li>plated to QQ-P-416 TYPE II CLASS 2 Specs for protection 40 times better than zinc</li><li>Exceptional torque strength is achieved as the GRIP-SERT's knurled body expands filling the hole</li><li>Offers highest all around strength characteristics and has been designed to be used with Grade 5 or Metric 8.8/10.9 screws</li></ul>|
Grip-Sert Threaded Inserts

Grip-Sert Threaded Inserts - 6-32

Manufacturer: Approved Vendor
Brand: Approved Vendor
TSN Thin Sheet Nutsert
TSN Thin Sheet Nutsert

TSN® (Thin Sheet Nutsert) - M8-1.25

Manufacturer: Approved Vendor
Brand: Approved Vendor
<ul><li>Applied MSS Coil offers the most effective and universally accepted method of thread repair.</li><li>Applied MSS Coil inserts quickly and permanently restore stripped, worn or damaged threads to their original size and condition.</li></ul>|
Applied MSS℠ Coil Thread Repair Inserts & Kits

Applied MSS℠ Coil Thread Repair Inserts & Kits - M6-1.0

Manufacturer: Approved Vendor
Brand: Approved Vendor
Showing 1 - 12 of 14 Products