Automotive Wire Connectors & Terminals

Category

Automotive Wire Connectors & Terminals (11) Category Automotive+Wire+Connectors+%26+Terminals Automotive Wire Connectors & Terminals

Manufacturer

Approved Vendor (11) Manufacturer Approved+Vendor Approved Vendor

Brands

Approved Vendor (11) Brands Approved+Vendor Approved Vendor

Operating Temperature

-55��C to +125��C (1) Operating Temperature -55%EF%BF%BD%EF%BF%BDC+to+%2B125%EF%BF%BD%EF%BF%BDC -55��C to +125��C

Contacts

4 (1) Contacts 4 4

Automotive Wire Connectors & Terminals

11 Results

<ul><li>Integral connector latch - tactile and audible coupling feedback</li><li>Rugged thermoplastic housing - long service life</li><li>-55°C to +125°C operating temperature - engine compartment rated</li><li>Silicone seals - superior environmental seal</li><li>Accepts ga. 18 thru 14 wire - seals .088 to .145" dia insulation</li><li>Current rating: 13 amps all contacts - meets most power requirements</li><li>Fail safe secondary locks - reliable contact retention system</li><li>Hand insertable / removable contacts - no specific tools required</li></ul>|

Deutsch DT Series Connectors

Manufacturer: Approved Vendor

Brand: Approved Vendor

Automotive Triplex Wire - Yellow/Green/Brown

Automotive Triplex Wire - Yellow/Green/Brown

Manufacturer: Approved Vendor

Brand: Approved Vendor

Part #: 106252441

Legacy #: PA87895

Min. Order Qty: 1

<ul><li>Metri-Pack is a family of electrical connection systems that utilizes internationally standardized male blade sizes (series) allowing for flexibility in design. It </li><li>was designed to meet the assembly requirements of the automotive harness industry worldwide while providing superior electrical performance under the </li><li>most severe environmental conditions.</li><li>The Metri-Pack line includes many "application specific" components. Subtle terminal and housing variations within a given series are common, and most </li><li>similar-looking parts are not interchangeable. Metri-Pack is more likely to connect to a device such as a sensor, a switch, a relay, a header block, or even an </li><li>electronic control module. There are only a few in-line "mating" Metri-Pack parts.</li></ul>|

Metri-Pack Series 150

Manufacturer: Approved Vendor

Brand: Approved Vendor

Automotive Duplex Wire - Black/White

Automotive Duplex Wire - Black/White

Manufacturer: Approved Vendor

Brand: Approved Vendor

Part #: 116739511

Legacy #: PA12686

Min. Order Qty: 1

Warning: California Prop 65

Weather Pack Tools

Weather Pack Tools

Manufacturer: Approved Vendor

Brand: Approved Vendor

<ul><li>Weather Pack self-lubricating silicone seals feature multiple sealing ribs and will not stain, deteriorate or corrode other materials.</li></ul>|

Weather Pack - Cable Seals

Manufacturer: Approved Vendor

Brand: Approved Vendor

Deutsch Removal Tool

Deutsch Removal Tool

Manufacturer: Approved Vendor

Brand: Approved Vendor

Part #: 106282629

Legacy #: PA19392

Min. Order Qty: 1

<ul><li>Weather Pack terminals are tin-plated and utilize flex pin and lap-lock designs to provide the highest reliability. Their dual-locking tangs securely hold the terminal inside the connector cavity.</li></ul>|

Weather Pack Terminals

Manufacturer: Approved Vendor

Brand: Approved Vendor

Sealed Metri-Pack System: 280 Series

Sealed Metri-Pack System: 280 Series

Manufacturer: Approved Vendor

Brand: Approved Vendor

<ul><li>Metri-Pack is a family of electrical connection systems that utilizes internationally standardized male blade sizes (series) allowing for flexibility in design. It </li><li>was designed to meet the assembly requirements of the automotive harness industry worldwide while providing superior electrical performance under the </li><li>most severe environmental conditions.</li><li>The Metri-Pack line includes many "application specific" components. Subtle terminal and housing variations within a given series are common, and most </li><li>similar-looking parts are not interchangeable. Metri-Pack is more likely to connect to a device such as a sensor, a switch, a relay, a header block, or even an </li><li>electronic control module. There are only a few in-line "mating" Metri-Pack parts.</li></ul>|

Metri-Pack Series 280

Manufacturer: Approved Vendor

Brand: Approved Vendor

<ul><li>Weather Pack connectors are made of nylon material for the best combination of temperature resistance and flexibility. They have been tested to withstand temperatures of -40° to 125°C. Used in tough applications including construction, off road, and farm equipment.</li></ul>|

Weather Pack Connectors

Manufacturer: Approved Vendor

Brand: Approved Vendor

Showing 1 - 11 of 11 Products

back To Top